DTF Transfer Film A3 Sheets 11.7" x 16.5" (100 Pack) - GLOSSY Cold/Warm Peel

Kingdom DTF Premium DTF Transfer Film is a hybrid cold or warm peel. This is a solution so versatile that gives you bright colors and is premium coated. You and your customers will be amazed and happy.

NOTE: This product needs DTF Inks and DTF Powder.

Package: 100 Sheets

Instructions:
- Micros: 75um 
- Sheet type: A3 (11.7 inches x 16.5 inches)
- Print side: Coated printable single side, Glossy back non-printable
Press Time: (F = Fahrenheit) Each heat press is different, please use the best that works for you.
- Cotton: 320F to 350F for 10-30 sec.
- Blends: 300F to 320F for 10-30 sec.
- Poly: 280F to 300F for 10-15 sec.
- Press pressure: High
- Final press: After peeling, press with Teflon for 10 sec.

Works on:
- Suitable for DTF Inks and DTF Powder.
- For use on cotton, polyester, blends, Tri-blends, leather, spandex, and more.
- Can be used for dark and light fabric.
- A Great soft hand feel.

Types of DTF Transfer Films:

This one

- Glossy (single side)
The print side is coated opaque. The backside is clear glossy non-printable, non-coated, and easy to identify.
This can be peeled cold or warm.

Matte, Glitter, Glow in the Dark, and Reflective Holographic are also available.

CLOG BREAKER Cleaning Solution 8oz (STRONG) for Epson Printheads - DTF and DTG

This Cleaning Solution is engineered more strongly to clean and flush Epson printheads and break down clogged and dry inks more easily. You can flush the print head, either manually with the syringe and tubing (flushing the printheads), or for printers that are cartridge-based, you can fill this cleaning solution into cartridges and use those cartridges as cleaning cartridges running up to 3 cleaning cycles with them. Use this cleaning solution with a syringe in its full strength to have the best chance of recovering a printhead.

- Refill cartridges, and use them to clean your print head.
- Safe for Printheads and capping stations.

As part of your daily maintenance at the end of the day when you finish, is recommended to use a Capping Station Solution to do a wet cap to keep your print head optimized when doing DTF or DTG.

If you need a less aggressive cleaning solution check our Regular Cleaning Solution.

If you need to flush lines and lubricate the head for going on an extended period of time "vacation time" check our Cleaning Piezo Red Solution.

PRO TIP: Mix and heat the cleaning solution with distilled water in a container to soak the print head and help with clogs. Doing a regular flush and a reverse flush when the mixture is hot will help remove the clog faster, but you also need to be patient. MAKE SURE ELECTRONICS DO NOT GET WET.

NOTES:
1. This product is to clean and flush Epson print heads.
2. Bottle sizes may vary.

Cleaning RED PIEZO Solution 8oz (Vacation & Repair) for Epson Printheads - DTF and DTG

This Cleaning Red Piezo Solution (Vacation & Repair) is a professional grade engineered for Epson printheads. It is used by many technicians around the world for repairing printers, maintenance, and keeping printheads moist. Now you can get it for cleaning, flushing, repairing, and storage for up to 30 days when you go on vacation. You can use it to print nozzle check and see if you have missing patterns or to help you repair printheads, as well you can also use it to wet capping stations to help the printhead stay unclogged.

- 8oz Bottle
- This is safe for capping station and all Epson printheads.

If you need more affordable cleaning solutions and wet capping check our Regular Cleaning Solution, and the Capping Station Solution as part of your daily maintenance as well.

NOTES:
1. This item is only compatible with Epson print heads.
2. Bottle sizes are subject to change.

Cleaning Swabs for Printheads - DTF and DTG

MEASUREMENTS: Total swab length: 5.1" (128mm), Head length: 0.9" (24mm), Head width: 0.5" (15mm), Head Thickness: 0.34" (8.8mm), Handle Length: 4.1" (104mm)

GOOD QUALITY: Every foam swab head is made from the highest quality open-cell foam securely bonded to a polystyrene shaft.

GREAT FOR USE: Perfect to clean DTF print head, DTG print heads, keyboards, and tight to reach places, great use for piezoelectric photo machine print nozzles, water-based, and most solvent printhead.

MULTIPLE USES: Swabs are also great to use around the house such as A/C vents and vents around your kitchen range.

USE FOR PRINTERS & OPTICAL EQUIPMENT: Cleanings Swabs are made specifically for cleaning sensitive equipment such as printers, microscopes, optical sensors, and safe for solvent print heads.

Color may vary depending on availability

10ml Syringes and Tubing for Printhead Cleaning (Set of 5)

Syringes for clean and flush printheads as part, and a necessary tool to do proper maintenance to any DTF printer or DTG printer. A syringe and tubing can be attached.

- 5 10ml syringe
- 5 tubing

Black DTF Ink - Best Direct To Film Ink (DTF ink)

Experience superior print quality with Kingdom DTF Inks, formulated with high-quality materials for vibrant prints. This dtf ink is ideal for all Epson desktop printers that utilize a Piezo head, such as the L1800, L800, 1390, 1400, 1430, P400/P408, P600/P608, P800, R1800, R1900, R2880, R2000, R3000, 3880, 4880, 7880, XP-15000 and more, as well as all dual-head DTF Printers such as the Knight 12™ DTF Printer Dual Head, and similar.

This includes the following Kingdom DTF ink:

- Black dtf ink (K)

NOTES:
1. It is advised to gently shake the ink prior to use and on a daily basis in order to prevent ink separation.
2. Both a DTF Film and DTF Powder are required to achieve a successful DTF transfer.
3. Bottle sizes may differ.

WARNING:
1. These inks are NOT the same as (DTG) Direct to garment inks.

10ml Syringes and Tip for Prime Dampers (Pull Ink) - Set of 5

Syringes for prime dampers, clean and flush printhead as part, and a necessary tool to do proper maintenance to any DTF printer or DTG printer.

- 5 x 10ml syringes

- 5 x Tip